Skip to main content
Paints For Life-2-1-C
CHP 535
About formulation
C base paint and coating product
C (without pigment)

Base

Indoor and interior paint and coating products
Indoors

Application

Paints and coatings for walls  and ceilings
Walls

Product type

Excellent scrub resistance paint and coating products
Class 1

Scrub resistance

Semi-matt paint and coating products
Matt

Finish

Solvent-free ecological paint. Waterborne, CH-Polymers vinyl acetate acrylic binder paint, transparent pigment base. Recommended for obtaining intense dark tones.  Zero VOC <1 g/L, zero SVOC <1 g/L and reduced amount of biocide product. Matt finish and superior wet-scrub resistance. Created as interior wall paint. Suitable for plaster, concrete, putty, as well as plasterboard on both new surfaces and previously painted surfaces. The product has excellent application properties and is easy to apply on a smooth surface with minimal paint splatter  Superior wet scrub resistance allows for washing the painted walls. Recommended for living rooms, corridors, children's rooms or kitchens. Not intended for doors or furniture. Apply with a roller or brush.

Formulation benefits
Zero VOC paint product

Zero VOC

The amount of VOC in the product is below 1 g/L. The product is classified as zero VOC paint.

Low VOC paint and coating products

Reduced amount of biocides

The amount of in-can biocides (MIT/CMIT, MIT) in the paint product is below 15 ppm. The product is classified as low biocide paint. 

Excellent scrub resistance paint and coating products

Excellent scrub resistance

Paint product reach requirements of 1st Class (After 200 washing cycles <5μm abrasion), provides high durability against mechanical exposure.

Composition of formulation
Technical Data of formulation

The information summarised in the table provides a comprehensive overview on physicochemical and functional properties of the paint formulation. For detailed information, please refer to the formulation TDS and MSDS documents. The technical data of the formulation were obtained under laboratory conditions by preparing a paint sample in a volume of 1L.

Parameter
Description
Area of application:
Indoors
Binder:
Vinyl acrylic
Volume solids:
39
Weight solids:
49
Density:
1.23
Stormer viscosity:
6000-8000
Gloss:
7
Washability/wet scrub resistance:
Class 1 (1.9 µm)
Spreding rate:
A sample in the form of a transparent base without a pigment concentrate was presented for the test. The coverage assessment was not carried out due to the transparent coating.
Material consumption:
6-8 m2/L
Temperature at painting:
Minimum +5 oC
VOC (g/L):
0.11
SVOC (g/L):
0.03
PVC %:
27
Labeling requirements:
EUH 208 (Contains 2-methyl-2H-isothiazol-3-one (MIT) and reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1) (C(M)IT/MIT (3:1)). May produce an allergic reaction.
Raw materials in formulation

The information in the table provides an overview on the raw materials used. The information is compiled from the TDS and MSDS documentation, submitted by the raw material suppliers.

100%
Paints For Life-2-1-C CHP 535
25.36%
Solvent Water

Water

Drinking water

Form 
Liquid
Weight, %
(in ready made formulation)
37.78
Density g/mL 
1.00
Volume, %
(in ready made formulation)
37.78
VOC content 
none
SVOC content 
none
BIT (ppm) 
not added
CMIT/MIT mix (ppm) 
not added
MIT (ppm) 
not added
Bronopol (ppm) 
not added
Download raw material documentation
1.00%
Defoamer BYK-1640
1.76%
Dispersing agent DISPERBYK-199
2.00%
Organoclay Alina T65W
0.54%
Thickener RHEOLATE FX 1100
11.10%
Filler Myanit 0-10-GH
11.10%
Filler Myanit 0-30-GH
43.86%
Binder CHP 535
0.44%
Thickener Rheovis PU 1191
2.84%
Thickener RHEOLATE HX 6010 IF

Paints For Life-2-1-C

CHP 535
Waterborne, CH-Polymers vinyl acetate acrylic binder paint, transparent pigment base. Zero VOC and reduced amount of biocide product. It is primarily designed as interior wall paint. Suitable for concrete, plaster boards, plaster, wallpaper or previously painted surfaces. Matt finish and superior wet-scrub resistance.
Eco level
3
Manufacturing costs
3
Download TDS, MSDS filesRequest usage rights